Hamamatsu Photonics C11440-10C, Инструкция по эксплуатации

Страница: 33 / 38

C11440-10C Ver.1.2
13-2-2 CAMERALINK INTERFACE
Camera Link interface is a standard of digital interface for industrial digital cameras. It
transfers 28bit digital data (TX0 to TX27) by converting parallel data to only 5 signals (X0,
X1, X2, X3, XCLK) of serial data. This camera is compatible to CameraLink interface / Base
configuration 12 bit 2TAP digital camera standards at 1x1 normal readout mode, and 14 bit
digital camera standards at 2x2 binning readout mode.
(1) CameraLink connector pin assignments (SDR-26)
Camera connector Frame grabber connector Channel Link signal
1 1 Inner Shield
2 25 X0-
3 24 X1-
4 23 X2-
5 22 Xclk-
6 21 X3-
7 20 SerTC+
8 19 SerTFG-
9 18 CC1-
10 17 CC2+
11 16 CC3-
12 15 CC4+
13 13 Inner Shield
14 14 Inner Shield
15 12 X0+
16 11 X1+
17 10 X2+
18 9
Xclk+
19 8 X3+
20 7
SerTC-
21 6
22 5 CC1+
23 4 CC2-
24 3 CC3+
25 2 CC4-
26 26 Inner Shield
31