4
Note
•
If pairing was successful, the status LED (6)
flashes blue every 3 seconds.
•
If pairing was not successful, the status LED
(6) flashes blue every 5 seconds, and you will
have to perform pairing again.
•
You can now use the headset.
5.2. Automatic Bluetooth
®
connection (after
successful pairing)
Note
•
Make sure that your Bluetooth
®
-capable
terminal device is on and Bluetooth
®
is
activated.
•
Make sure that your Bluetooth
®
-capable
terminal device is visible for other Bluetooth
®
devices.
•
For more information, please refer to the
operating instructions of your terminal device.
•
Make sure that the headset is switched on.
•
After the headset and terminal device have been
paired, a connection is established automatically.
•
You can now use the headset.
Note
•
If pairing was successful, the status LED (6)
flashes blue every 3 seconds.
•
If pairing was not successful, the status LED
(6) flashes blue every 5 seconds, and you will
have to perform pairing again.
•
It may be necessary to change the settings
on your terminal device to enable it to
automatically connect to the paired headset.
Note – Connection impaired
After the headset and terminal device have been
paired, a connection is established automatically.
If the Bluetooth
®
connection is not established
automatically, check the following:
•
Check the Bluetooth
®
settings of your
terminal device to see whether Hama Trexis is
connected. If not, repeat the steps listed under
5.1. Bluetooth
®
pairing
.
•
Check whether obstacles are impairing the
range. If so, move the devices closer together.
•
The performance can also be affected by a
weak battery.
5.3 Hands-free function
Note
•
Note that support for certain key functions
may vary depending on your terminal device.
•
For more information, please refer to the
operating instructions of your terminal device.
You can use the headset as a hands-free set for your
mobile phone.
