30
Volume:
You can set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Save:
Confirm this menu item to complete your alarm settings.
Note
•
When using
Internet radio
for the alarm sound take
care that the internet connection will be available at
the time of the alarm.
If no internet connection is available the radio instead
uses the wake-up buzzer (
Buzz
).
•
It is recommended to allow the radio to update the
time automatically. This ensures that the time is
always correct even if there is a separation of power
supply – for example a power cut.
16.2 Activating/ deactivating the alarm
•
Confirm the menu item
Save
in alarm settings to activate
the alarm.
•
Disable the alarm by setting the
Mode
: to
Off
15.3 Stopping the alarm/ Snooze function
•
When the alarm activates, press [
on/off
] to stop the
alarm.
•
Repeatedly press [
SNOOZE
] on the remote control to
activate snooze mode.
•
The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
•
Repeatedy press [
SNOOZE
] on the remote control to
activate
ON
instead of snooze mode. The radio now
stays switched on.
•
If the alarm is not stopped, the radio automatically
switches into standby mode after one hour.
17. System settings
You can modify all settings and access important
information about the radio in the System settings.
17.1 Equaliser
The equaliser allows you to adjust the sound of the radio
to suit your preferences by amplifying or reducing the
amount of bass or treble in the audio .
You can choose from preconfigured profiles, adjusted to
suit a variety of music genres, or create your own custom
profile.
•
To set the Equaliser, proceed as follows:
[
menu
]
System settings
Equaliser
•
Use [
navigation
] to choose one of the preconfigured
profiles.
•
To create your own equaliser profile, choose the option
My EQ profile setup
.
•
This takes you to the settings for
Bass
and
Treble
•
To adjust a particular value, press [
navigation
] at the
corresponding menu item and then change the value by
turning [
navigation
]. If playback is already started when
you modify these settings, you can hear the changes in
the audio immediately.
•
Confirm your settings by pressing [
navigation
] once
more.
•
Complete the configuration process by pressing [
back
]
on the device and confirm the saving of settings by
pressing [
navigation
].
•
To use the new profile, choose the item
My EQ
.
