13
5.4 Initial setup
The Setup Wizard starts up automatically when the radio
is turned on for the first time. The default used language
is English. You can skip the Setup Wizard and start up
anytime in your language.
Set up your desired language as described in
15.4.
Language
.
5.4.1 Setup wizard
You can choose between starting the initial setup via Setup
Wizard (
YES
) and skipping the Setup Wizard (
NO
).
YES/NO
Note – Starting up with or without
the setup wizard?
•
We recommend using the setup wizard (
YES
) to
quickly and easily configure the time, date, internet
connection, etc.
•
If you wish to skip setup with the setup wizard
anyway, choose
NO
. All of the settings configured
by the setup wizard can be configured or changed
individually in the System settings menu. Alternatively,
you may restart the setup wizard at any time.
•
Next, choose YES or NO to define whether the setup
wizard should start automatically next time the radio
is started up. You are in the main menu.
• 12/24 hours format
• Auto update
• Update from DAB/ FM
If automatic time and date adjustment is
activated, the device receives time and date
information from the station over the FM/DAB/
DAB+ radio network. This is the best way to
ensure that the clock will run accurately and the
alarm will trigger at the correct time, even after
power outages.
• Update from Network
Choose this option to set the time and date
automatically from the internet. Set the timezone
of your current location and, if desired, turn (
ON
)
automatic adjustment between summer time and
winter time.
• No update
The time and date (
DD-MM-YYYY
) must be set
manually; no automatic calibration takes place.
This setting is a radio energy-saving function. If this feature
is disabled (
NO
*), the network module will be switched
off whenever the radio is not actively using the network
connection (such as in standby mode). This means the
radio will not be accessible via the network from your PC,
smartphone or tablet.
You should enable (
YES *
) this menu item if you want
to use streaming or control functions via the app. This
function is disabled by default.
– Configuration of network
connection
Note – Reference to a different part of these
operating instructions.
•
Because this chapter is extensive, please follow the
directions in section
