15
Proceed as follows to do the settings:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER
] (9) to navigate to the "Volume
adjustment" menu item.
•
Confirm the selection by pressing [
NAVIGATE/ENTER
]
and choose your preferred setting.
9.6 Station sequence
By default the radio sorts stations into alphabetical order.
You can also sort by signal strength or ensemble. To
change the sorting order, proceed as follows:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER
] (9) to navigate to the "Station
sequence" menu item.
•
Choose between "Alphanumeric" and "Ensemble" and
confirm your selection by pressing [
NAVIGATE/ENTER
].
10. FM
From the main menu or after pressing [ ] repeatedly,
activate operating mode
FM (FM Radio)
on the radio.
Stations that broadcast additional information regarding
the station and the programme, are highlighted on the
display with an RDS icon (Radio Data System).
This additional information is displayed by pressing
[ ]
.
10.1 Search setting
The search setting allows you to determine whether
stations with low signal strength are ignored during the
automatic search. Proceed as follows:
•
Press [ ] (4) to access the Settings menu.
•
Use [
NAVIGATE/ENTER
] (9) to navigate to the "Scan
settings" menu item.
•
Confirm the selection by pressing [
NAVIGATE/ENTER
].
•
To have the search run stop only at stations with high
signal strength, select
Available stations only
.
Otherwise, the search run will stop at every station for
which a signal is received.
Note
By default, the "Available stations only" method is
selected.
10.2 Search / Automatic search
•
Press [
NAVIGATE/ENTER
] to start a station search.
•
The radio stops the search and starts playback when it
finds a station.
•
Press [
NAVIGATE/ENTER
] again to continue the search
until the next station is found.
10.3 Manual station search
With manual station settings, you can
define the required frequency yourself
and also receive stations that had signals too weak
to pick up on the automatic station search and which
therefore
were not included.
•
Press [back] to switch to the manual station setting
option.
•
Turn [
NAVIGATE/ENTER
] (left: - 0.05 MHz / right: +
0.05 MHz) until the desired frequency is displayed. Wait
a moment until playback of the received station signal
begins.
•
Press [back] again to exit the manual station settings.
10.4 Presets
You can save up to 30 of your favourite stations for quick
and direct access.
Note
Presets cannot be deleted. If all 30 station memory slots
are filled and you wish to save a new station, choose
one of the occupied slots. The station in this slot will be
overwritten with the new station.
Содержание DIR3030BT
Страница 2: ...A B 2 3 4 5 1 6 7 8 9 2 1 3 4 5...
