2
G
Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep
these instructions in a safe place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
•
Attachment bar (2x)
• Installation kit (see contents, Fig. 1)
•
TV support arms (2x)
• Drilling template
•
TV base plate
• These operating instructions
Note
Please check that the installation kit is complete before installing the bracket and ensure
that none of the parts are faulty or damaged.
3. Safety Notes
Warning
•
Given the multitude of terminal devices and wall structures available on the market,
the supplied mounting kit is unable to cover every option.
•
In some cases, the screws for attaching the terminal device to the product on the
wall bracket are too long.
•
Please note that the supplied wall plugs are for use with concrete brick and solid
brick walls only.
•
Read the operating instructions for your terminal device before attempting to mount
it. The instructions provide information about the type and measurements of suitable
fastening materials.
•
If the supplied mounting kit does not contain suitable fastening materials for
mounting the terminal device, purchase these from a specialised dealer.
•
If the installation surface on which the bracket is to be mounted is made of different
materials or construction types to those specified, purchase suitable mounting
materials from a specialised dealer.
•
Never apply force during installation. This may damage your terminal device or the
product.
•
If in doubt, have this product mounted by a qualified technician - do not attempt to
mount it yourself!
Note – Commercial use
•
If the device is used commercially, increased duty of care requirements apply.
•
Therefore, please observe the accident prevention regulations of the German
employer’s liability insurance association for electrical systems and equipment. Please
also observe all accident prevention regulations from other applicable employer’s
liability insurance associations and accident insurance companies, as well as any legal
regulations applicable to the particular industry and/or location.
•
The bracket must be installed by trained personnel or by a special technician,
especially when installed in schools, educational institutions, hobby/self-service
workshops or other publicly accessible institutions.
•
Secure the product and the attached load against falling using suitable equipment
(e.g. an arresting cable) and in accordance with locally applicable regulations.
•
We strongly recommend these additional safeguards even if they are not legally
required.
•
Have trained personnel carry out regular inspections to ensure that the product is
securely installed, properly functioning and in acceptable condition (we recommend
inspections at least every 6 months, or more frequently if required for the particular
location) and then document these inspections.
•
Do not mount the product above locations where persons might linger.
•
Once you have mounted the product and the attached load, check that they are
sufficiently secure and safe to use.
•
You should repeat this check at regular intervals (at least every three months).
•
When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions is
attached.
•
Make sure that the product is loaded symmetrically.
•
During adjustment, ensure that the product is loaded symmetrically and that the
maximum permitted carrying capacity is not exceeded.
•
Maintain the necessary safety clearance around the attached load (depending on the
model).
•
In the event of damage to the product, remove the attached load and stop using the
product.
4. Intended use and specifications
•
The bracket is only intended for use within buildings.
•
Use the bracket only for the intended purpose.
Maximum load bearing capacity:
50 kg
Screen size:
81.0 - 165.0 cm (US: 32" - 65")
Ceiling distance from centre of TV holder:
105.1 – 155.1 cm
Angle:
up to -25°
Pivoting range:
up to 360°
Mounting plate dimensions:
20 x 6
cm
Mounting holes:
according to the VESA standard 400x400
5. Installation requirements and installation
Note
•
Only mount the bracket with the help of a second person. Get the support and help
you need.
•
Different end devices have different options for connecting cables and other devices.
Before installation, ensure that the necessary connections will still be accessible
after installation.
•
The same mounting kit is included with all of our TV brackets. Depending on the
product and mounting type, you may not need to use the entire mounting kit.
Unneeded screws and other small parts may be left over, even if the bracket is
properly mounted. Keep the leftover parts and the operating instructions in a safe
place, in case you might need them later on (e.g. should you move, sell the product,
mount the bracket in a different location, buy a new TV, etc.).
Warning
•
This product is suitable for wall mounting only.
•
Before installing the bracket, ensure that the wall on which the television is to be
mounted is suitable for the weight and make sure that no electrical wires, water, gas
or other lines are located at the installation location.
•
Please note that the provided wall anchors are only approved for concrete and solid
brick walls.
•
Observe the other warnings and safety instructions.
•
Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.)
•
The desired height should be chosen during installation. (Fig. 2)
Note
•
Given the multitude of terminal devices available on the market, we cannot describe
all possible mounting options here.
•
Please ensure that the bracket lays flat and evenly on the back of the television.
•
Use the enclosed spacer to even out any unevenness on the back of the television.
•
Ensure that all screws have the proper length and can be mounted until they are
hand-tight (see Fig. 5).
6. Setting and maintenance
Note
Only adjust the Bracket with the help of a second person. Get the support and help you
need.
•
To adjust the inclination and horizontal angle, loosen the mounting screws, set
the desired inclination and angle, and then tighten the screws securely once more.
(Fig. 1c, 6b)
•
Secure by inserting the carrying arms into the wall plate and tightening both screws.
•
Check that the bracket is secure and safe to use at regular intervals (at least every three
months). Only use water or standard household cleaners for cleaning.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
Содержание 00118655
Страница 27: ...25 ...
