manualshive.com logo in svg

Halton Safe Management 2.0, Инструкция по установке, пусконаладке, эксплуатации и техническому обслуживанию

Поделиться
Скачать
Halton Safe Management 2.0 Скачать руководство пользователя страница 18

4.2.2 Installing a Halton Safe HSL link unit

1. From the design drawings, determine the installation place.

2. Install the unit securely.

4.2.3 Installing a Halton Safe HSP power unit

1. From the design drawings, determine the installation place.

2. Install the unit securely.

4.2.4 Installing a Halton Safe HSR unit

1. From the design drawings, determine the installation place.

2. For detailed installation instructions, see the Calectro website.

4.2.5 Installing a Halton Safe HSD unit

1. From the design drawings, determine the installation place.

2. For detailed installation instructions, see the Calectro website.

4.2.6 Connecting a Halton Safe HSL link unit to the Halton Safe Management 2.0 controller

Connect the wiring according to the connection or wiring diagrams. You can find the connection and wiring
diagrams in Technical reference data.

4.2.7 Connecting a Halton Safe HSL link unit to a Halton Safe HSP power unit

Connect the wiring according to the connection or wiring diagrams. You can find the connection and wiring
diagrams in Technical reference data.

4.2.8 Connecting a Halton Safe HSR unit to a Halton Safe HSL link unit

Connect the wiring according to the connection or wiring diagrams. You can find the connection and wiring
diagrams in Technical reference data.

4.2.9 Connecting a Halton Safe HSD unit to a Halton Safe HSL link unit

Connect the wiring according to the connection or wiring diagrams. You can find the connection and wiring
diagrams in Technical reference data.

4.2.10 Connecting a fire damper to a Halton Safe HSL link unit

Connect the wiring according to the connection or wiring diagrams. You can find the connection and wiring
diagrams in Technical reference data.

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

18

1.0

All rights reserved ©Halton

Содержание Safe Management 2.0

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды