manualshive.com logo in svg

Halton Safe Management 2.0, Инструкция по установке, пусконаладке, эксплуатации и техническому обслуживанию

Поделиться
Скачать
Halton Safe Management 2.0 Скачать руководство пользователя страница 10

▪ Easy to connect with other systems

▪ 10.1" graphical touch screen

▪ BACnet/IP communication to Building Management System (BMS)

2.2 Operating principle

The Halton Safe Management 2.0 system can be modularly extended with up to 50 pieces of Halton Safe HSL link
units to which the fire dampers and smoke detectors are connected. 1–4 fire dampers and 1–4 smoke detectors
can be connected to each Halton Safe HSL link unit. The link unit's internal control logic is used in managing the
fire dampers and smoke detectors. An internal communication bus is used between the Halton Safe Management
2.0 controller and Halton Safe HSL link units. Halton Safe HSP power units provide power to Halton Safe HSL link
units.

Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide

10

1.0

All rights reserved ©Halton

Содержание Safe Management 2.0

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды