halseytaylor.com
HALSEY TAYLOR, 2222 Camden Court, Oak Brook, IL 60523
GENERAL
Modular, electric refrigerated, wall-mounted water cooler designed to
be easily accessible to physically challenged individuals. When properly
installed, unit meets state and federal requirements as defined by the
Americans with Disabilities Act for children or adults. Unit is certified to
NSF/ANSI 61 and meets requirements of the Safe Drinking Water Act.
FOUNTAIN
Face-mounted, one-piece, non-corrosive stainless steel cooler top, type
300 series with satin finish, contour-formed basin with softly rounded
corners and edges.
BUBBLER
Exclusive one-piece, chrome-plated two-stream mound-building bubbler
with non-removable anti-squirt feature and integral hood ensures a
satisfying drink of water.
PUSHBUTTON ACTUATION MECHANISM
Self-closing, vandal-resistant pushbutton does not require grasping or
twisting.
AUTOMATIC STREAM HEIGHT REGULATOR
Self-closing assembly is located inside unit to prevent tampering. Unit
resists corrosion and liming. A constant stream height is automatically
maintained under line pressures that vary from 20 to 105 psi.
INLET STRAINER
Easily cleaned in-line strainer screen traps particles of 140 microns or
larger before they enter the waterway.
WATER INLET -
3/8” O.D. Tubing.
DRAIN OUTLET -
1-1/4” tube
outlet for 1-1/4” slip joint connection.
Trap and service stop not
included.
REFRIGERATION SYSTEM
Hermetically sealed, positive start compressor with lifetime lubrication
and built-in overload protection, efficient capillary sizing, large capacity
dryer-strainer, and self-lubricated fan cools copper/aluminum condenser.
System uses R134A refrigerant. Protected by Halsey Taylor’s Limited 5
Year Warranty.
MOUNTING FRAME
Mounting frame is manufactured of corrosion resistant, galvanized steel.
Open construction designed for ease of installation. Mounting frame can
be shipped in advance for rough-in installation.
WARRANTY
5 year limited warranty on the unit’s refrigeration system. Electrical
components and water system are warranted for 12 months from date of
installation or 18 months from factory shipment, whichever date falls first.
Contour™ Barrier-Free
HCRFER Fountain
with Back Panel
Model HCRFER
PANELS
Constructed of stainless steel, type 300 series with satin finish.
Removable lower panel provides access to plumbing and
refrigeration system. Panels overlap wall opening 1/2”.
SUGGESTED SPECIFICATIONS
Shall deliver 7.5 GPH of 50°F water at 90°F ambient and 80°F
inlet water. Fountain shall include pushbutton valve on front,
contour-formed basin to eliminate splashing and standing
water, and round corners and edges. Bubbler shall be chrome
plated, two-stream, mound-building type. Cooler shall comply
with ANSI 117:1 and ADA for visual and motion disabilites. The
manufacturer shall certify the unit to meet the requirements of
NSF/ANSI 61, and the Safe Drinking Water Act. Unit is UL 399 &
ASHRAE 18 (previously ARI 1010) compliant.
Rated for Indoor Use Only
SPEC00349 01/2016
CAPACITIES CHART
Model
Order ID
Voltage / Hertz Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Wt.
ADA
Compliant
UL399 and
CAN/CSA 22.2
No. 120
Certified
NSF/ANSI
61 and 372
Certified
HCRFER
8633089683
115V / 60Hz
7.5 GPH
5.0
370
84 lbs.
•
•
•
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
NOTE: Continued product improvement makes specification sheets subject to change without notice.
Standard Finish is Stainless Steel
Optional Accessories (extra cost):
• Vandal-Resistant Bubbler Kit (97446C)
• Easy-Flex™ Bubbler Kit (55905C)
• Access Panel (APHT)
• 1500 Gal Filter (HWF172)
Each HCRFER-Q consists of 3 cartons of the following:
• Mounting Frame
• Cooling Unit-SJ8-Q
• Fountain, Panels & Misc. Parts
