Halo BOLT AIR, Руководство по эксплуатации

Страница: 1 / 18

HALO BOLT AIR
Thank you for choosing HALO!
Powerful and loaded with features including a new, easy to use digital
display, the HALO BOLT AIR can be used to safely jump start your
vehicle or inflate your tires. The HALO BOLT AIR provides portable
power so you can charge your phone, tablet and other electronic
devices anywhere! The HALO BOLT AIR also includes a convenient
floodlight and emergency light. Compact, versatile and simple to use,
the HALO BOLT AIR and all accessories fit neatly in its carrying pouch
and is perfect to store in your home or vehicle for every day use or an
emergency need. Never be without a charge, a jump start, or with a flat
tire again!
TABLE OF CONTENTS
Included Items
Operating Instructions
Troubleshooting Guide
Safety Precautions
Specifications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT AIR
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
OPERATING INSTRUCTIONS
CHARGING YOUR HALO BOLT AIR
IMPORTANT: Before using your HALO BOLT AIR for the first time, fully
charge it (so that pressing any button, displays 100% on the digital
screen).
To charge your HALO BOLT AIR, use the provided Wall Charging
Adapter, and plug the AC adapter plug into the charge input. Next,
connect the AC adapter into a wall outlet. The HALO BOLT AIR will
automatically begin charging. When the HALO BOLT AIR is fully
charged, all five battery indicator lights will be solid green and the
digital screen will indicate 100% charge. (This could take up to 9 hours).
While charging, the digital screen will illustrate the charge percentage
of the HALO BOLT AIR. When fully charged, disconnect the cable.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT AIR
1. Plug the jumper cables into the jump start output on the
HALO BOLT AIR.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT AIR contains the HALO SMART CHARGE TECHNOLOGY
to achieve higher compatibility for charging standard 5V USB electronic
devices. The HALO SMART CHARGE TECHNOLOGY will allow the HALO
BOLT AIR to communicate with your electronic device and provide the
fastest and safest charge for that device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT AIR FLOODLIGHT
The floodlight can be turned on and off by simply pressing and
releasing the floodlight ON/OFF button. The first press will turn on the
floodlight. Second press will turn on the red emergency light. Third
press will turn on SOS flashing red light. The floodlight will
automatically turn off after 2 hours of inactivity.
SPECIFICATIONS
Battery Cells: 3x Li-Polymer 5300mAh
Battery Pack Energy: 58830 mWh
Jump Start: 12V/500Amps
Air Compressor: 100PSI max
Input: 14V/0.85A
USB Output: 2x USB 5V/2.4A
Dimensions: 118 x 242 x 47mm
Weight: 1150.10 g
SAFETY PRECAUTIONS
• Read all instructions before using the product.
• Your HALO BOLT AIR should not be used to jump start unregistered
vehicles.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Caution: The lithium-ion rechargeable battery used in this charging
device may present a risk of fire or chemical burn if mistreated. Do not
disassemble, expose to heat above 212°F (100°C) or incinerate.
• Misusing or incorrectly connecting your HALO BOLT AIR may cause
electric shock to users and damage equipment.
• Your HALO BOLT AIR may become warm under extended high power
operation. During operation, keep your HALO BOLT AIR away from
materials that may be affected by these temperatures. Do not cover,
wrap, or otherwise restrict the HALO BOLT AIR during operation.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, fire or explosion,
causing personal injury or damage to other devices.
• Do not disassemble your HALO BOLT AIR. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or fire hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT AIR if it has received a sharp blow, or has otherwise been
damaged in any way.
• Do not expose your HALO BOLT AIR to moisture, water, rain, or snow.
• Do not insert any object into the ports or openings of your HALO BOLT
AIR.
• Only charge your HALO BOLT AIR by the specified method with the
specified charging adapter provided with the unit.
• In the unlikely event of leakage or explosion use sand or a chemical
fire extinguisher.
• Ensure there is no metal object between your device and the HALO
BOLT AIR when charging your device wirelessly as the object may
become hot.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Keep your HALO BOLT AIR dry and away from moisture and corrosive
materials. The HALO BOLT AIR should not be used near water or wet
areas such as bathtubs, showers, bathrooms, sinks, swimming pools
or basements.
• Do not clean your HALO BOLT AIR with harsh chemicals, soaps or
detergents. Just wipe the case with a soft cloth.
• Keep your HALO BOLT AIR away from heat sources, including open
flames, radiators, stoves, ovens, and any other devices that product
heat.
• Do not puncture, crush or subject to mechanical shock.
• Make sure the HALO BOLT AIR’s charging ports do not become
contaminated with lint or other debris. Use a canned-air type of
product periodically to ensure that the port openings are clear.
• Recharge your HALO BOLT AIR once every three months when not in
use.
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certified peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certified peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the first 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
HALO BOLT AIR COMPRESSOR
The HALO BOLT AIR comes equipped with a 12 Inch Air Hose Extension
and 4 Interchangeable Air Nozzles. Simply twist on the corresponding
nozzle to inflate balls, pool floaties, bike tires, and more!
1. Connect the air hose to the tire or use the appropriate nozzle to
connect to your inflatable device
2. Press the (+) or (-) button to set the desired pressure. The pressure
measuring units can be changed by pressing the UNIT button.
3. Once the desired pressure has been set, begin inflating by pressing
the Air Compressor ON/OFF button. The air compressor will shut off
automatically once the pressure has been reached.
CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT AIR USB 5V/2.4A Output ports.
2. Turn on the USB charging by pressing the
USB Power ON/OFF Button on the HALO BOLT AIR.
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274, or
email us at support@BestHALO.com.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and fitness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.