Hall Research Technologies HHD264, Руководство пользователя, Страница: 20 / 24

HHD264
20
© Copyright 2016 Hall Research, Inc.
Command
Terminated by <CR>
Response Function
set_osd [string(auto|on|off)]
Auto= OSD will turn off when there is an
input signal detected.
On or Off – OSD Stays on or off forever
OK – Success
Error – Fail
Set OSD mode of the system
get_osd Auto
On
Off
Query the OSD mode status
set_device_name [string(1~30)]
Where string can be 30 characters long
OK – Success
Error – Fail
Set the device name
get_device_name [string(1~30)] Query the device name
get_fw_version Tx/Rx Firmware : x.x.x.x.xxxxxxxx
Returns the firwmare version
Query the firmware version
factory_reset Processing factory reset!
System will reboot after few sec!
Factory reset the device
Reboot System will reboot after few sec! To reboot the unit
get_company_id xxx Query the company ID
set_streaming_mode
[string(unicast|multicast)]
OK – Success
Error – Fail
Set the streaming mode of
the device
get_streaming_mode
[string(unicast|multicast)]
[string(unicast|multicast)]
where unicast means one-one
configuration and
multicast means one to many and
many-to-many configuration
Query streaming mode status
Exit Exits the telnet session
11.0 EDID
The HHD264 offers EDID management meaning that the user can write a
custom EDID file into the device using the HDMI input of the transmitter,
HHD264-S. Hall Research’s EMX-HD-AUD audio extractor and EDID manager
works perfect to achieve this purpose.
12.0 Power over Ethernet (PoE)
The HHD264 comes with a Power Over Ethernet (PoE) solution that eliminates
the need to have a power supply for the unit. The device gets its power from the
PSE (Power Sourcing Equipment) port in the Gigabit PoE switch.
NOTE
Factory resetting the HHD264 will restore back the default Hall Research
EDID to the device. The user must confirm the action and take all necessary
precautions to prevent loss of data. Hall Research is not responsible for any
damage that may occur from the user attempting to modify the EDID..