HALDER EH 22350, Руководство по эксплуатации

Страница: 38 / 53

4 Transport and storage
4.4 Permitted aids for transport
38
– Ensure that no persons are standing in the path of transport or under suspended
loads.
– Always lift the packing units or pallets of the lifting pin slowly and carefully to ensure
stability and safety.
–
Remove transport safeguards (if present).
4.4 Permitted aids for transport
Shackles or hooks must be selected according to the transport weight of the packaging
units or pallets of the lifting pin and are only to be attached to the holding points provided
for this purpose.
Avoid contact of the carrying chains or ropes with the packing units or pallets of the lifting
pins. If this is not possible, take appropriate precautions to prevent damage to the
packing units or pallets of the lifting pins.
Adjust the length of the carrying means so that the packaging units or pallets of the lifting
pins can be transported horizontally.
4.5 Scope of delivery
The scope of delivery of the lifting pin consists of the following components:
– lifting pin
–
Brief operating instructions
4.6 Interim storage
If the lifting pins are not used immediately after delivery, they must be stored carefully in a
protected place. The lifting pins must be stored temporarily in such a way that they are
protected from cold, moisture, dirt and mechanical influences.
For the recommended storage conditions of the lifting pins, please refer to chapter
“3.3.1 Ambient conditions“.
In case of improper storage, no liability will be accepted for any damage caused!