Page 5 of 24
V2.0
Important Messages
The information in this manual is believed to be accurate to date. However, Hal
Technology assumes no responsibility for any inaccuracies that may be contained in this
manual. In no event will Hal Technology be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. In the interest of continued product
development, Hal Technology reserves the right to make improvements or changes in this
manual and the products it describes at any time, without notice or obligation.
Published in the United States of America
Copyright © 2015 by Hal Technology
All rights reserved. No part of the contents of this manual may be reproduced, transmitted,
stored, or translated into any other language in any form by any means without the written
permission of Hal Technology.
Quality Assurance
•
This product has met the product specifications. All the test instruments and
standard materials used for calibration are traceable.
•
This certification is for new production only and not valid for used one or ones for
an exhibition purpose.
Commonly used symbols in this manual
Following symbols are used throughout this manual:
The action could lead to harmful damage to the instrument.
Bring you attention about the features of the instrument.
