26
Operation
2.3.7
Driving and braking behavior
To switch off all functions im-
mediately, turn the key switch
to '0'.
Pay attention to the following points
when driving:
• The driving speed and deceleration
of the vehicle are controlled by the
accelerator.
• On releasing the accelerator, the en-
gine brake is automatically applied.
This also applies when driving up
and down gradients.
• Stop the vehicle: Release your foot
from the accelerator
• When the vehicle has come to a halt,
the parking brake is automatically
applied. The vehicle cannot then be
pushed.
Overload protection
In the event of overloading, e.g. too
steep a gradient, the hydraulic engine is
switched off after a time.
• Allow the engine to cool down for ap-
prox. 15 minutes.
• Start the vehicle again.
2.3.8 Pushing the vehicle
The vehicle can only be pushed when
the Unlocking button (Fig. 13/1) of the
brake is pressed in.
• Set the key switch to "On".
• Press and hold the Unlocking button
and, at the same time, push the vehi-
cle.
DANGER
When the Unlocking button is
pressed in, no braking effect is
applied to the vehicle!
The Unlocking button is at the front left
of the vehicle (viewed in driving direc-
tion) under the chassis.
Fig. 13
1
Содержание Scrubmaster B115 R
