HAKO Citymaster 650 Скачать руководство пользователя страница 91

Страница: 91 / 190

03-147015-00-00.fm

Operation

3.5 Transporting and towing the vehicle

3.5.1

Transporting the vehicle

Securing the vehicle

•

Place a wheel chock diagonally before and behind any front or rear

wheel.

•

Additional security by one three-point belt each.

Warning

•

Danger to life! Start driving slowly! Make sure that there are no persons in the towing area.

•

Risk of injury! The vehicle may be loaded only using suitable loading aids, such as a loading ramp

or drive-up planks.

•

Risk of injury! After loading, make sure that the vehicle is secured according to regulations against

rolling off and tilting. Use the wheels for securing the vehicle.

Warning

•

Tow the vehicle using only suitable towing gear!

•

The vehicle may be towed with a towing rope only if the brakes and steering are functioning!

•

When the engine is still the steering has only emergency steering properties!

•

Secure the vehicle against unintended movement! Lock the parking brake and insert the locking

strap on the articulated joint. Note that the steering is then blocked!

Attention

•

The towing speed may be at most 2 km/h, the towing time at most 30 minutes and the towing

distance at most 1 km!

Fig. 92:

Содержание Citymaster 650































































































































































































Результаты поиска

Содержание Citymaster 650

Отзывы:

HAKO Citymaster 650, Руководство по эксплуатации, Страница: 91 / 190

Результаты поиска

Содержание Citymaster 650

Отзывы: