HAKO Citymaster 2200 Скачать руководство пользователя страница 186

Страница: 186 / 238

186

05-1481-00-00.fm

Maintenance and servicing

5.6

Engine

Safety instructions – Engine

Danger

•

Inhaling exhaust gases is injurious to health and can lead to unconsciousness and to death! Never

let the engine run in enclosed spaces. Danger to life due to toxic engine exhaust gases.

•

Do not touch any parts such as engine block, cooling system and exhaust system during

operation and for some time after. Allow the engine to cool down. There is a risk of burns!

•

Risk of injury to limbs or of hair or clothing getting caught up in rotating parts. Switch the engine off

and pull out the ignition key. There is a risk of burns!

Attention

•

If the engine oil pressure warning symbol in the multifunction display lights up with the engine

running, there is a risk of engine damage! Stop the vehicle in the safe area. Turn the engine off

immediately and check the oil level. Have the cause of the inadequate engine oil pressure

removed.

•

Excessive or incorrect engine oil may result in engine damage. For this reason:

•

Do not add engine oil to above the MAX marking on the oil dipstick.

•

Engine oil specification, see Engine/vehicle fluids and lubricants.

Environmental danger

•

Ensure safe and environment-conserving disposal of operating and auxiliary materials. Take up

escaping or spilled operating materials in suitable containers and dispose of them in an environ-

mentally friendly manner.

Содержание Citymaster 2200















































































































































































































































Результаты поиска

Содержание Citymaster 2200

Отзывы:

Бренды по названию

Популярные бренды

HAKO Citymaster 2200, Руководство по эксплуатации

Результаты поиска

Содержание Citymaster 2200

Отзывы:

Бренды по названию

Популярные бренды