HAKO Citymaster 2200, Руководство по эксплуатации, Страница: 142 / 238

142
03-1481-00-00.fm
Operation
Filling circulating water
In order to enable long-term and dust-free sweeping, the circulating water
system in the dirt hopper
Fig. 110-A
should be filled with water prior to
each sweeping operation.
1. Drive the vehicle to a suitable water extraction point.
2. Secure the vehicle with the parking brake.
3. Open the dirt hopper flap
Fig. 110-A
with the tip switch
Fig. 110-106
.
4. Connect the water hose and fill the dirt hopper with water up to the
lower edge of the suction duct flange
Fig. 110-B
. Use the C hose
connection
Fig. 110-C
as an alternative.
Filling quantity, see Technical data.
Fig. 110:
A
106
C
B
Note
If too much circulating water was taken up (for example due to
rain water) during the sweeping operation, the surplus quan-
tity can be drained from the dirt hopper via a hand valve, see
page 153.