background image

130

 03-1481-00-00.fm 

Operation

3.4

Vacuum sweeping system

Safety instructions – 
Vacuum sweeping system

Danger

It is not permitted to stand underneath the dirt hopper if it is not secured. Always fit the safety strut 

whenever working underneath the dirt hopper. There is a danger to life!

Special caution is required in the area of the front and rear-mounted equipment and attachments. 

There is a danger to life!

Avoid sudden turns when driving uphill or downhill or across slopes. Danger to life due to the 

vehicle tipping over in an inclined position! The vehicle speed must always be adapted to the 

surrounding conditions and the load condition.

Make transport journeys only with a raised sweeping unit and with a completely lowered dirt 

hopper. There is a risk of accidents!

The stability of the vehicle is influenced by a filled dirt hopper. Handling of the vehicle must be 

adapted accordingly. There is a risk of accidents!

Do not exceed the permissible total weight of the vehicle! There is a risk of accidents!

When the dirt hopper is emptied, the Citymaster 2200 must be on a sufficiently load bearing, 

horizontal surface. Driving with the dirt hopper tilted is not permitted. There is a risk of accidents!

The jet of the high-pressure cleaner (option) must not be directed to persons. There is a risk of 

injury!

Caution

The vacuum sweeping system may be operated only in connection with the Citymaster 2200. The 

safety regulations for the Citymaster 2200 must be complied with absolutely.

Attention

When removing blockages in the suction hose or attaching the hand suction hose (option), switch 

off the engine and wait for the suction fan to come to a standstill.

The vacuum sweeping system must be cleaned at least once a day, or more often in case of 

heavy soiling.

Do not use steam cleaners and high-pressure cleaners (option) for cleaning electrical/electronic 

components and the engine compartment!

Содержание Citymaster 2200















































































































































































































































Отзывы: