HAKO Citymaster 1600, Руководство по эксплуатации

Страница: 129 / 222

06-1491-00-12.fm 129
Attachments and Options
Filling circulating water
1. Switch off the suction fan of the dirt hopper!
2. Open the lock
Fig. 109-A
of the dirt hopper.
3. Adjust the rear flap with the lever
Fig. 109-B
.
4. Fill the dirt hopper using a water hose. Use the side C hose connection
as an alternative.
5. Fill the dirt hopper up to the mark of the plate
Fig. 109-C
. Filling volume
for circulating water approx. 180 litres. After filling, check the function of
the supply to the suction mouth.
Checking the ball cock circulating water
The circulating water is closed off only with the ball cock for maintenance
purposes. In normal operation the ball cock
Fig. 110-10
must be opened!
•
Circulating water supply opened: Ball cock in flow direction
•
Circulating water supply closed: Ball cock at right angles to the flow
direction
A
A
C
B
Fig. 109:
C
Note
Fill less circulating water into the dirt hopper when it is raining
or wet. The vehicle sucks the remaining water off from the
road when sweeping.
Fig. 110:
10
Note
Close off the circulating water supply only if there is circulating
water in the dirt hopper and the suction mouth should be
mounted or dismounted.