HAKO 474, Инструкция по эксплуатации

Страница: 3 / 32

3. Precautions
2
In this instruction manual, “WARNING” and “CAUTIONS” are defined as follows.
WARNING
WARNING: Misuse may potentially cause death of, or serious injury to the user.
CAUTION : Misuse may potentially cause injury to the user or physical damage
to the objects involved.
For your own safety, be sure to comply with these precautions.
CAUTION
Remove the pump securing screw (M4
×
25 marked red) from
the bottom of the station.
Failure to do so may result in serious problems.
When the power is on, the nozzle temperature is between
380°C/716°F and 480°C/ 896°F.
Since mishandling may lead to burns or fire, be sure to comply with
the following precautions.
l
Do not touch the metallic parts near the nozzle, nearby plastic parts and the
spring iron holder.
l
Do not use the product near flammable items.
l
Advise other people in the work area that the unit can reach a very high tem-
perature and should be considered potentially dangerous.
l
Turn the power off while taking breaks and when finished using the unit.
l
Before replacing parts or storing the unit, turn the power off and allow the unit
to cool to room temperature.
To prevent damage to the unit and ensure a safe working environ-
ment, be sure to comply with the following precautions.
l
Do not use the unit for applications other than desoldering.
l
Do not rap the desoldering gun against the work bench to shake off residual
solder, or otherwise subject the iron to severe shocks.
l
Do not modify the unit.
l
Use only genuine HAKKO replacement parts.
l
Do not wet the unit or use the unit when your hands are wet.
l
Set the ceramic paper filter (S) for the filter retainer (station), and the ceramic
paper filter (L) for the filter pipe (gun).
l
Maintain the desoldering gun and the station.
l
While using the unit, don’t do anything which may cause bodily harm or physi-
cal damage.
English
CAUTION:
This product includes such features as electrically conductive plastic parts and grounding of
the handpiece and station as measures to protect the device to be soldered from the effects
of static electricity. Be sure to observe the following instructions:
1. The handle and other plastic parts are not insulators, they are conductors. When
replacing parts or repairing, take sufficient care not to expose live electrical parts or
damage insulation materials.
2. Be sure to ground the unit during use.