Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 94 / 746

Chapter 2 Overlap
2-29
2
O
v
er
lap
S
iz
e
Li
mi
ts
Overlap Size Limits
•
There is a limit to the size of a normal, call-, or multi-overlap that can be
displayed on one screen.
•
Set the size of the normal or call-overlap placed on the screen, or of the
multi-overlap (when displaying several multi-overlaps, the maximum size
displayed) so that the combined size does not exceed the maximum overlap
size shown here.
(Unit: bytes)
* Overlap size of a screen with video settings, etc.
•
Normal, call-, and multi-overlap calculation method (unit: dots)
Overlap size = Overlap width
×
Overlap height
•
Areas 1 and 2 are discontinued areas. Depending on the overlap size, there
are cases when settings cannot be made on the overlap even if it falls within
the total acceptable value. In this case, the error message “There is an error
in the data. No. 54” is displayed on the MONITOUCH. In the case of
multi-overlap, the overlap becomes inactive and is not displayed. If the limit
is exceeded, reduce the size of the overlap.
Example: For V608
If you have three normal overlaps shown below, the total size falls within
range, and thus, there is no problem.
Model
Maximum
screen size
Maximum overlap size*
Maximum overlap size
(for video)*
V6
V606/V606i 76,800 153,600
−
V608C
307,200
Area 1: 368,640
Area 2: 307,200
Total: 675,840
−
V610C/V608CH
921,600
−
V610T 614,400
V610S
V612T
480,000
Area 1: 88,576
Area 2: 1,047,424
Total: 1,136,000
Area 1: 88,576
Area 2: 740,224
Total: 828,800
V609E 256,000 Total: 256,000
−
V7
V7xxxS (800
×
600) 480,000 Total: 1,136,000
−
V710iT/V710T/V708C
(640
×
480)
307,200 Total: 921,600
−
(Base)
640
480
448
400
Overlap No. 2
Overlap No. 0
640
×
480 = 307,200 ( 1 )
448
×
400 = 179,200 ( 2 )
448
400
Overlap No. 1
448
×
400 = 179,200 ( 3 )
1 ( = 307,200) 307,200
2 + 3 ( = 358,400) 368,640
=
<
=
<