Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 512 / 746

Chapter 19 JPEG Display (V7 Only)
19-5
19
Dis
p
la
y
ing
the
Pr
ep
ar
ed
JP
EG
F
ile
[File No.] (JP) / [File Name]
This setting is effective when [ Memory] is unchecked. The specified file
number or file name is displayed. When you select [File No.], the target file
is of the type “JPxxxxx.JPG (xxxxx: 0 to 32767).” When you select [File
Name], the target file is of the type “xxxxxxxx.JPG (xxxxxxxx: 8 one-byte
alphanumeric characters).” Specify the file number or file name of JPEG that
you want to display.
[Process Cycle]
Set the cycle to read data into the PLC from the V series when the V series is
communicating with the PLC.
For more information, refer to “Appendix 2 Process Cycle.”
Display Area
Display area part is required for JPEG display. By placing it in the same division
as the [JPEG Display] dialog, it is liked as the display area for the JPEG file.
♦
Notes When Placing
Display area needs to be large enough to display the JPEG file. When the
display area is smaller than the JPEG file, part of the file is cut off.
When display area is bigger than the JPEG file, a part of the display area is
shown. It is recommended that you make the display area color match the
background color.
Use a color that matches the background.
Size is the same
Size is smaller than JPEG file
Size is larger than JPEG file