Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 495 / 746

Chapter 18 Video Display (V7i Only)
18-20
[Blend Value] (0 (Light) to 255 (Deep))
Set the blend ratio of the overlap to the video display. When the blend value
is closer to [0], overlap is displayed faintly. The overlap becomes more
visible as you increase blend value closer to [255]. [255] is the same status
as without “superimpose.”
Calling Methods
♦
The Same as Usual Overlap:
The calling method of [ Superimpose] (checked) is the same as
[ Superimpose] (unchecked). The calling method varies depending on the
type of overlap (normal, call, multi). Refer to the calling methods for each type
(Chapter 2).
♦
Calling from the Video Items:
Depending on the setting of the video display items, you can call overlap with
“superimpose” by clicking the video display.
Click the [Detail] icon of the video display item to be clicked. The [Video] dialog
is displayed. Click the [Movement] tab to set the following.
[ Display Operation Screen When Clicking (Superimpose)]
By checking this box, the specified overlap is displayed when you click the
video image.
•
[Overlap No.]
Specify the number of overlap to be displayed.
Only one type of this setting is available for one screen. You cannot change
the setting for each overlap.
Note that the method above only available for [Normal] or [Call] overlap.