Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 464 / 746

Chapter 17 Animation (V7 Only)
17-9
17
[A
nim
a
ti
on]
Dia
log
[Animation] Dialog
The image for each registered animation number needs to be set up in the
[Animation] dialog on the screen to define the range of movement and the
memory addresses needed to display images. Click the [Animation] icon on the
screen edit. The [Animation] dialog is displayed.
[Main] Tab Window
[Division No.]
You can register one animation in one division.
[Command Memory]
This memory is to display the registered animation number on the screen.
The content of memory is as follows.
(1) Animation displayed/not displayed (Bit 0)
When this bit is set [1] (ON), the image of the corresponding animation
number is displayed. When you reset it to [0] (OFF), the image is
cleared.
An animation can be set only on the base screen. Note that you cannot
register it on overlaps.
Animation displayed/ not displayed (1)
System reserved (Set [0])
Play Pause/Resume (2)
Move Pause/Resume (3)
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
0 0 0 0 0 0 0 0 0 0 0 0 0
MSB LSB