Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 346 / 746

Chapter 10 Sampling
10-51
10
Bi
t Sa
mp
lin
g
[Digits]
Depending on the setting for [Digits], the sampling time is indicated in the
following format:
Less than 8 digits No display
From 8 digits up to 14 digits hour : minute : second
15 digits or greater month - date, hour : minute : second
For more information on other setting items, refer to “Chapter 5 Data Display.”
♦
Sample Status Display
The sample status display indicates which contents are being shown: bit ON, bit
OFF, or bit ON/OFF. This function is defined by the [Status Display] option in the
[Bit Sampling] dialog (page 10-46). The position or property of this area is set in
the [Char. Display] dialog as a character display part linked with bit sampling.
Notes on Setting
[Division No.]
Set the same division number as that in the [Bit Sampling] dialog.
[Display Function]
Choose [Sample Status Display].
[Bytes]
This setting depends on the setting for [Status Display] in the [Bit Sampling]
dialog
When [No] is chosen, the sampling status display function becomes invalid.
When [TYPE0] is chosen, enter “8” for [Bytes].
When [TYPE1] is chosen, enter the number of bytes required for messages
for bit ON/OFF.
For more information on other setting items, refer to “Chapter 5 Data Display.”
<ON> 06-04 11 : 32 : 10 A Tank Temperature Up
<OFF> 06-04 11 : 33 : 15 A Tank Temperature Up
<ON> 06-04 11 : 40 : 25 C Tank Temperature Down
<OFF> 06-04 11 : 50 : 13 C Tank Temperature Down
The content of this display area is shown.
<ON / OFF>