Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 316 / 746

Chapter 10 Sampling
10-21
10
T
rend
Sa
mpl
in
g
[Display in Area] (Foreground, Background, Tile)
For the inside of the trend sampling area, choose the desired foreground and
background colors and tile pattern. The [Background] option becomes active
when any tile pattern other than pattern 0 (extreme left) is chosen for [Tile].
[ Pen Recorder Type]
Check this option when using the pen recorder type display.
Example: Trend sampling setting
Direction: RGT
Trends: 11
[Setting All]
When setting the same data for [Data Length], [Graph Max. Value] and
[Graph Min. Value] of trend line Nos. 0 to 15 where [
Trend Display] is
checked, it is convenient to use this function to set in a batch.
Pen Recorder Type Pen Recorder Type
• No. of Samples
<
Trends
The newest data move from left to right.
• No. of Samples
>
Trends
Newest data at the right
Newest data
Newest data
Newest data always at the right
[Setting All] Setting Procedure
1. Click the tabs of [0] to [15] in the [Trend Sampling] dialog, and check the [ Trend
Display] box.
2. Open the [Setting 1] tab window. Click the [Setting] button next to [Setting All]. The
[Setting All] dialog is displayed.
• [Data Length] (1 to 2)
Choose either [1-Word] or [2-Word] for data length.
• [Graph Max. Value] [Graph Min. Value]
Specify the maximum and minimum values for each trend line. ( Refer to
page 10-23.)
3. Set the above options.
4. When setting has been completed, click [OK]. The specified [Data Length], [Graph
Max. Value], and [Graph Min. Value] are used for the selected trend line Nos. 0 to 15
where [
Trend Display] is checked in the respective tab window.