Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 295 / 746

Chapter 9 Graphic Display
9-20
♦
Notes
•
Pattern Edit
The following limitations apply when using a transparent color for the pattern.
* Pattern size = X size
×
Y size
* Total size = Pattern size
×
2 (bytes)
If this limit is exceeded, transparent setting is automatically rendered inactive
and the registered color of the pattern is XORed with the background before
it is displayed.
•
[Graphic] mode
You must set [Command: External] in the [Graphic] dialog. When you want
to change and display several types of graphics, it is recommended that you
place display area parts.
•
[Graphic Relay] mode
- [Type: 1-Graphic]
Depending on whether the transparent pattern is displayed, it is possible
for the display that is usually XORed to be displayed in its registered
color.
- [Type: 2-Graphic], [Mode: XOR]
It is necessary to set [Type: 2-Graphic] when changing between two
types of graphics. In this case, be sure to set [XOR] for [Mode]. If you
set a transparent pattern to be displayed in [REP], there is a possibility
that it will not be displayed normally.
V7 series/V612/610/608 V606/V606i
1 pattern size 4,088 dots 4,088 dots
Maximum per screen 64 32
Total size per screen 256 kbytes 64 kbytes
80
×
50 = 4,000
<
4,088 dots
[With Transparent] valid for this pattern
80 dots
50 dots
When using the transparent patterns for animation function of graphic or
graphic relay mode, overlapping the patterns on each other may make the
display abnormal. Overlapping the transparent pattern is not recommended.
When the moving transparent pattern for animation is overlapped on the
placed one for drawing, the display is normal.