Hakko Electronics Monitouch V Series, Справочное руководство

Страница: 147 / 746

Chapter 5 Data Display
5-8
•
[Display Type] and available ranges
[ Zero Suppress]
Choose whether or not to use the zero suppress function. When using the
zero suppress function, check the box (
).
Example: For “000123”:
[Flush L]/[Flush R]
This setting is valid when [ Zero Suppress] is checked. Choose either
flush-left or flush-right for aligning numbers.
Example: When “123” is shown in a 5-digit data display area:
[ Specify Range]
Data in [Input Range] that the PLC has
read is automatically converted into
[Display Range] that is set. It is possible to
eliminate correction program of the data
that the PLC has read when displaying
temperature, rotation speed, etc.
[Input Range]
Specify the input data range on the PLC side.
[Display Range]
Specify the data range that is displayed on MONITOUCH.
Example: Num. Data Display
When data in the PLC memory address D100 is “2000” with [Input
Range: 0 to 4,000] and [Display Range: 0 to 100], “50” is displayed on
MONITOUCH.
Code 1-word Range 2-word Range
DEC (w/o sign) 0 to 65535 0 to 4294967295
DEC (w/
−
sign)
−
32768 to 32767
−
2147483648 to 2147483647
DEC (w/
±
sign)
−
32768 to +32767
−
214748648 to +2147483647
HEX 0 to FFFF 0 to FFFFFFFF
OCT 0 to 177777 0 to 37777777777
BIN 0 to 1111111111111111 0 to 11111111111111111111111111111111
[ Zero Suppress] (flush right)
→
123
[ Zero Suppress]
→
000123
Space
Flush-left
→
123
Flush-right
→
123
4000
100
0
0
PLC
V series
If data in the PLC memory
×
the maximum value of [Display Range] is greater
than double-word, it cannot be displayed correctly.