Hakki Pilke HakkiFeed 472, Руководство пользователя

Страница: 3 / 14

3 / 14
Hakki Feed 472 Translation Version 1
1. General information
1.1. Introduction
The purpose of this manual is to ensure that the machine is used in the manner intended by the
manufacturer, taking safety into consideration. Everyone operating the machine or working in close proximity
to it must study this manual carefully.
Before commencing work, operators must also familiarise themselves with the machine's control and safety
equipment, and ensure their proper operation.
Additional information on Maaselän Kone Oy’s products is available on our website at
www.hakkipilke.fi .
Keep this manual in the immediate vicinity of the machine.
1.2. Purpose of use
The Hakki Feed 472 log table is intended for moving pruned wood or logs onto a Hakki Pilke firewood
processor. The firewood processor must not be used to process any treated wood, such as is found in
construction waste.
The maximum diameter of the logs to be processed is 55 cm. This limit must not be exceeded. Do not exceed
a height of 50 cm when stacking several smaller logs on top of each other. The topmost load-bearing capacity
in Section 1.3 must not be exceeded.
1.3. Machine models and basic information
Model Hakki Feed 472 (accessory, Hakki Pilke)
Driving power Hakki Pilke firewood processor’s hydraulics (max 200 bar, max 16 l/min)
Weight 965 kg (Note! 2 m ext415 kg)
Height/width/length 1,000–1,440 / 2,200 / 3,600 (+ext2,000) (mm)
Max log diameter 55 cm
Max/min log length 5,000 mm–2,500 mm
Max load-bearing capacity 4,000 kg (Note! 2 m ext2,000 kg)
The machine’s serial number, year of manufacture, weight and model are provided on the grey type place
fixed to the machine’s frame – right side of the in-feed conveyor
C . (Figure 2, right side by the motor)
1.4. Operating conditions

The temperature range within which the machine can be operated is -20 to +30 °C. In the winter, the
operator must ensure that there is no risk of slipping in the working area.

The working area must be level and clear of unnecessary items. No unauthorised persons must enter
the working area. The machine may only be used in sufficient lighting conditions.
1.5. Safety instructions

This machine is intended to be operated by only one operator. The danger zone is 10 m from the
machine.

Persons under 18 years of age may not operate the machine.