Hakki Pilke 50 Easy, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 12 / 38

12
HakkiPilke 50 Easy Version 1.2 2012
3.2. Controls
Figure 9. The machine's controls
Names and functions of the controls in Figure 9
A. Control for additional hydraulics. For example, a log
holder.
B. Adjustment for the downward pressure of the
cutting flange

Turning the knob clockwise increases the
speed of the motion, and vice versa.
C. Height adjustment for the cutting blade
D. Joystick – control

Input conveyor control – upper right and
upper left

Cutting control – down

Splitting – release from the bottom position

Wood press: button A in Figure 10

Blade chain activation: button B in Figure 10
E. Lifting, lowering and turning the output conveyor
F. Reset pedal for splitting
G. Activation pedal for splitting
H. Adjustment for the running speed of the output
conveyor

Turning the knob anti-clockwise increases the
speed.

The conveyor slows down and eventually stops
when the knob is turned clockwise.
Figure 10. Joystick