Haivision Makito X4, Руководство по установке, Страница: 4 / 39

www.haivision.com
Makito X4 Encoder 1.1
Makito X4 Rugged Encoder Installation Guide
4 Generated on: 2024-02-08 22:26:05
HVS-ID-IG-MX4ER-11, Issue 01
1.
2.
•
•
•
3.
Before You Begin
Unpack the box and visually inspect the package contents for any evidence of shipping damage.
See the
Important Notice document in the box for a list of contents.
In addition to the contents of the box, you may need to have the following items available:
Four #8-32 or M4 screws for mounting (not included)
Haivision cabling kits (see
Makito X4 Rugged Product Numbers ) or your own custom
cables (see Makito X4 Rugged Encoder Pinouts )
A laptop with Web browser, Telnet client, and video player (e.g., VLC)
To view the output from the encoder, make sure you have a decoding device or video player that
supports the UDP Transport Stream format.
Note
If the device is to be installed in a remote location (e.g., on a utility pole, or on a mobile platform),
we recommend that you follow the instructions in this Installation Guide to perform an initial setup
in a "staging" environment, such as a lab or control center. Once the device has been set up and is
demonstrated to be operating normally, you can then move it to the remote location.

Caution
Before installing the device, please refer to "Safety Guidelines" (below). Only connect the unit to a
compatible power source. If an electrical fault occurs, disconnect the unit and contact Haivision
Technical Support. Never try to force the connections when setting up the system as this may
damage the unit.

Caution
Hot surface. Avoid contact. The chassis can achieve a surface temperature 95°C in poorly
ventilated environments, and may cause personal injury if touched.
ATTENTION Surface chaude. Eviter le contact. Le châssis peut atteindre une température de
surface de 95°C dans des environnements mal ventilés et peut causer des blessures en cas de
contact.

Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
AVERTISSEMENT Ce produit est destiné à être installé dans une zone d'accès restreint. Les zones
d'accès restreint sont protégées par un mécanisme spécifique, par une serrure et une clé, ou par
tout autre dispositif de sécurité.

Caution
The IP67 rating only applies when the connectors are mated.
Otherwise the usage of dust cap connectors (provided by Haivision, shown in the following figures)
is required.
