Haivision Makito X4, Руководство по установке, Страница: 13 / 39

www.haivision.com
Makito X4 Encoder 1.1
Makito X4 Rugged Encoder Installation Guide
13 Generated on: 2024-02-08 22:26:05
HVS-ID-IG-MX4ER-11, Issue 01
3.
•
•
The Status LED next to the video inputs will start blinking green, indicating that the encoder is
booting up.
Wait until the Status LED stays solid green, indicating that the encoder is ready for operation.
Related Topics
For pinout information, see Power Entry Connector .
To order the PSU, see Makito X4 Rugged Technical Specifications ( Product Numbers ).
Note
The encoder performs Built-in Self Tests (BIST) and Power-On Self Tests (POST) to ensure that the
hardware and firmware are operating reliably and correctly. BIST provides a minimal suite of tests
that test the various hardware and firmware sub-systems to ensure correct operation. The POST
suite of tests (a subset of the BIST suite) are performed every time there is a power-cycle. All
BIST/POST configuration, status and test results are available via CLI (serial, Telnet or SSH). For
more information, please refer to
bist
(in the Makito X Encoder User’s Guide , CLI Command
Reference).
