Haivision Makito X4 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 39

Haivision Makito X4 Скачать руководство пользователя страница 10

www.haivision.com

Makito X4 Encoder 1.1

Makito X4 Rugged Encoder Installation Guide

10

Generated on: 2024-02-08 22:26:05

HVS-ID-IG-MX4ER-11, Issue 01

1.

2.

Connecting to the Network and Audio/Video Sources

The Makito X4 Rugged enclosure provides rugged connectors for connecting the encoder's Network
interface(s), as well as the Video, Audio, Serial, and Power inputs.

The Makito X4 Rugged encoder supports either one 12G-SDI 4K/UHD video input, or four 3G-SDI inputs,
along with three analog composite CVBS (NTSC/PAL/PAL-M) inputs.

To connect the encoder to the network and A/V sources:

Remove the protective caps from the encoder's connectors.
Connect the encoder's

Network 1

connector to the IP network using the

Ethernet cable

:

Note

Only SDI 1 can support input up to 6/12G-SDI

video

. All the other inputs support up to 3G-SDI

.

The Serial port is used to ingest KLV/CoT, as a management port or as pass-thru for camera
control.

The Network 1 port is live; Network 2 is for future use.
The Ethernet and audio/serial breakout cables are shipped as part of the Evaluation Kit (#S-MX4E-
R-SDI4-ISR-DK).



«
...
8
9
10
11
12
...
»

Содержание Makito X4








































Отзывы:

Нет отзывов