manualshive.com logo in svg

Haivision Makito X, Руководство пользователя, Страница: 37 / 404

Поделиться
Скачать
Haivision Makito X Скачать руководство пользователя страница 37

Introduction 

Physical Description

Makito X User’s Guide, v2.0, Issue 01

37

MB6X Chassis Indicators and Alarms

Some MB6X chassis models have a removable fan tray, located on the far right side of the 
chassis (as shown below). The fan tray may be removed from the front of the chassis. 

Figure 1-23

MB6X Chassis Front View showing Removable Fan Tray

The following table summarizes the functions of the fan tray LED indicators along with the 
alarm behaviors when faults occur. 

Table 1-4

MB6X Fan Tray LED Status Indicators and Alarms

Indicator Color & Description

Configuration

Power LED

Fan LED

Audible Alarm

OFF

OFF

OFF

No power to chassis.

Solid Green

Solid Green

OFF

Power applied to chassis and no issue/fault is 
reported.

Solid Green

Solid Red

ON

Chassis Power-ON – Fault(s) Detected.

The following faults will trigger the audible alarm and 
turn the FAN LED to RED:

• One, some, or all fans are blocked,

• One, some, or all fans have no power,

• An electrical short is detected (V+ to GND) on the 

fan tray,

• Thermocouple is missing,

• Thermocouple is shorted,

• Ambient temperature is over 55°C.

Solid Green

Solid Red

OFF

Chassis Power-ON – Fault(s) Detected – Mute 
button (Alarm ON/OFF) pushed

• To mute the audible alarm, push the Alarm 

ON/OFF button. Once the button is pushed, the 
alarm is muted. 

• To re-activate the alarm, push the Alarm ON/OFF 

button a second time.

Power LED (green)

Fan LED (red)

Removable Fan Tray

Alarm ON/OFF button

Содержание Makito X





















































































































































































































































































































































































































Отзывы:

Нет отзывов