Haivision Makito X Скачать руководство пользователя страница 136

Страница: 136 / 404

Managing the Encoder

Configuring Streaming Outputs

Makito X User’s Guide, v2.0, Issue 01

136

PCR PID

(Optional) (Program Clock Reference)
Packet Identifier. Timestamp in the TS from
which the decoder timing is derived.

16..8190

PMT PID

(Optional) (Program Map Table) Packet
Identifier.

16..8190

Transport Stream

(Optional) Transport Stream ID. Identifies
the transport stream in the Program
Association table (PAT) of the TS stream.

0..65535

Program Number

(Optional) Program Identifier used in the
Program Map Table (PMT) of the TS
stream.

0..65535

Destination

Address

n/a

Enter the destination IP address in dotted-
decimal format.

For multicast addresses, see

NOTE

page 128.

RTMP only

(If RTMP protocol is selected as the stream
type.) Enter a Fully Qualified Domain Name
(FQDN) for the application endpoint.

NOTE:

For more information, see

“CDN

and Flash Interoperability (RTMP)”

page

132.

Port(s)

n/a

Enter the destination UDP port(s). Enter a
number in the range

1025..65,535

. Note

that RTP streams use

even numbers only

within this range.

NOTE:

Direct-RTP streams require

different UDP ports for video and audio.
You must specify the second port number.

Link Parameters

Average Bandwidth

n/a

(Read-only) The average transmit
bandwidth for the unit in kbps.

FEC

None

(Optional) Enable Forward Error Correction
(FEC). Select either:

• (None)

• VF (TS over UDP only)

• Pro-MPEG FEC (TS over RTP only)

NOTE:

VF FEC is a proprietary FEC and is

not interoperable with devices outside of
the Haivision family.

Streaming Setting

Default (Cont.)

Description/Values (Cont.)

Содержание Makito X





















































































































































































































































































































































































































Результаты поиска

Содержание Makito X

Отзывы:

Haivision Makito X, Руководство пользователя, Страница: 136 / 404

Результаты поиска

Содержание Makito X

Отзывы: