Haivision Makito X, Руководство пользователя, Страница: 133 / 404

Managing the Encoder
Configuring Streaming Outputs
Makito X User’s Guide, v2.0, Issue 01 133
NOTE
When interoperating with Kaltura using RTMP, add a slash “/” at the end of the
URL provided by Kaltura.
4.
Type in the username and password for the CDN server. See “RTMP only” on
page 139.
5.
Click
Apply
to start the stream.
6.
To return to List View, click
O
UTPUTS
from the sidebar menu.
NOTE
You can create and stream multiple RTMP streams with identical server
destination and application name URLs in order to stream to both a primary and backup
RTMP entry point.
TIP
When creating a stream to an Akamai HD2 CDN, to avoid dropped frames by the
HD2 player, make sure that sufficient bandwidth exists between the Makito X and the HD2
node.
Publishing an RTMP Stream to YouTube
Following are the steps to publish an RTMP stream from the Makito X to YouTube:
1.
Log in to YouTube, and go to “My Channel” and then to “Video Manager”.
2.
Select “Live Events” in the navigation pane on the left and click the “New live event”
button on the top-right.
3.
Enter the event name, start date/time, and set Type to Custom. Click “Create Event”.
4.
On the “Ingestion Settings / Main Camera” page, choose “Custom ingestion”. Create
a stream, select “Other encoders” in the encoder list, and note the stream name and
the server URL which will appear below.
• When you click on “Custom ingestion”, you must choose the appropriate resolu-
tion (e.g., MXE (720p)). If you do not give the resolution you will transmit, You-
Tube cannot start to display your stream.
• When you select “Other encoders”, YouTube will give you a Stream Name (e.g.,
makrtmp.ee8a-v8qv-cury-70mg). This name correspond to the Makito X Publish
Name field.
YouTube will also give you a “Primary Server URL” (e.g., rtmp://a.rtmp.you-
tube.com/live2). This is the URL to use in Makito X Destination Address field.