Haivision Makito X Скачать руководство пользователя страница 93

Страница: 93 / 404

Managing the Encoder

Configuring Video Encoders

Makito X User’s Guide, v2.0, Issue 01

Frame Rate

Automatic

Select the coded picture frame rate per
second:

• Automatic: Encodes at the same frame

rate as the input

•

1..60

NOTE:

The frame rate cannot exceed the

input frame rate.

Framing

Select the video compression mode for the
encoded video:

• I: I frames only (lowest delay; lowest

quality)

• IP: I and P frames only

• IBP: I, B and P frames (H.264 only)

• IBBP: I, BB (two B frames in sequence)

and P frames (highest delay; highest
quality) (H.264 only)

NOTE:

B frames require a Main Profile

decoder.

B frames provide more quality as the
encoding is more efficient; thus more details
can be rendered in the same
bandwidth/bitrate.

GOP Size

120

Enter the Group of Pictures size for the
encoded video.

1..1000

Advanced Parameters

Aspect Ratio

Automatic

This specifies the aspect ratio of the video
source and signals it into the MPEG stream:

• Automatic: Aspect ratio is derived from the

incoming video source resolution.

• Manually force aspect ratio to either: 3:2,

4:3, 5:3, 5:4, 16:9, 16:10, or 17:9.

• WSS/AFD: Aspect ratio is extracted from

the incoming video source based on WSS
(Wide Screen Signaling) or AFD (Active
Format Description) if detected.

NOTE:

WSS is only supported with analog

PAL video; AFD is only supported with SD-
SDI video.

Closed Caption

Enabled

(Optional) Check this checkbox to enable
Closed Captioning on the output Stream.

NOTE:

For more information, see

Video Encoder
Setting (Cont.)

Default (Cont.)

Description/Values (Cont.)

Содержание Makito X





















































































































































































































































































































































































































Результаты поиска

Содержание Makito X

Отзывы:

Haivision Makito X, Руководство пользователя, Страница: 93 / 404

Результаты поиска

Содержание Makito X

Отзывы: