Haivision Makito X, Руководство пользователя, Страница: 341 / 404

CLI Command Reference
stream
Makito X User’s Guide, v2.0, Issue 01 341
videosrc 0*
(Optional) The video source.
id/name
The
id
is either
0
,
1
,
2
, or
3
(corresponding to
the encoder instance number in the Web
interface).
For HEVC encoders an additional
id
of 4 is
available and should be used to stream
HEVC-encoded video.
NOTE:
*By default, if you don't specify the
source, the stream uses video encoder
0
and
audio encoder
0
for a TS stream (UDP or
RTP), and video encoder
0
for DirectRTP and
other encapsulations.
Once you specify an audio or video source,
you have to enter all of them explicitly. For
example, even though a TS stream with no
sources specified automatically uses video
0
and audio
0
, if you specify that video
0
is your
source, then you must enter the audio source
or else the stream will not have any audio in it.
TIP:
Combined videosrc / audiosrc / datasrc
status shown under Contents in return output.
audiosrc 0*
(Optional) The audio source.
id/name
The
id
is either
0 , 1 , 2 , 3 , 4 , 5 , 6 , or 7
.
See also NOTE: and TIP: above (for
videosrc ).
NOTE:
To configure multi-track audio TS
streams (TS over UDP or RTP), you can put
more than one
audiosrc
(audio encoder) in
the stream. See “stream Examples” on
page 345.
IMPORTANT:
Audio sources should always
be associated with the same video interface
for the dual channel SDI encoder. (See
page
123 in “Setting Up Streaming” .)
datasrc n/a
(Optional) The metadata source.
id/name
(0=serial, 1 or 2=SDI;
all others are
UDP)
See “metadata” on page 290 to determine the
ID mappings.
NOTE:
To stream metadata from multiple
sources into the same KLV Elementary
Stream, use multiple comma separated
metadata source id/names to indicate the
metadata source ES IDs to be multiplexed in
the stream. e.g.:
stream create ….. data=1,2
Parameter Default (Cont.) Description/Values (Cont.)