Haivision Makito X Скачать руководство пользователя страница 30

Страница: 30 / 404

Introduction

Physical Description

Makito X User’s Guide, v2.0, Issue 01

Audio/Video Interfaces (Rear Panel)

NOTE

The Analog Audio interface is the same for both the Makito X DVI (#S/B-292E-

DVI) and the Makito X SDI (#S/B-292E-HDSDI2).

Makito X DVI-I Video and Embedded Audio Interface

The Makito X DVI video interface consists of a single DVI-I connector (shown below).

Figure 1-16

DVI-I Video Interface (#S/B-292E-DVI)

The DVI-I connector supports the following inputs:

•

Component Analog video (Y,Pb,Pr / RGBHV)

•

Component Digital video (Y,Cb,Cr / DVI)

•

SD and HD video

•

Computer graphics

•

Two channels of DVI-I digital audio

Only one input format – either digital (DVI-D) or analog (DVI-A) – is encoded at a time.

NOTE

Additional Information:

• The Makito X encoder supports EDID resolution capabilities negotiation.

• If the content is HDCP copy-protected, the stream will not be encoded.

Содержание Makito X





















































































































































































































































































































































































































Результаты поиска

Содержание Makito X

Отзывы:

Haivision Makito X, Руководство пользователя, Страница: 30 / 404

Результаты поиска

Содержание Makito X

Отзывы: