1. Charge your HairMax LaserComb
using either
the Charging Cradle and Power Cord (Figure A) or
by placing Power Cord directly into the handle end
of the HairMax (Figure B). For initial charging, allow
2-3 hours to fully charge your HairMax LaserComb.
For more information, refer to your user manual.
2. To turn on HairMax LaserComb
press and hold
the Power Button (lower button) until the green
indicator light turns on. Next press the Laser
Button. The Laser Button Indicator will light up red
which means the laser is ready for use.
3. Place HairMax LaserComb flat on your scalp
making sure that both rows of teeth are touching
the scalp.
4. Start at your hairline.
Move the HairMax from
front to back of scalp in a slow combing motion,
pausing every ½ inch (1cm) for 4 seconds. Do not
lift the HairMax off your scalp while combing from
front to back. Next, lift the HairMax off your scalp
and start at a new position at the hair line.
The HairMax LaserComb® is a very effective device when used
correctly. It is manufactured using precision components. Please
take time to read the entire User Manual before operating the
HairMax LaserComb.
Recommended usage of the HairMax Professional 12 is 8 minutes
3 times per week. Move HairMax slowly 1/2 in (1cm) every 4 seconds.
It is recommended, but not essential, that the HairMax LaserComb
be used on a clean scalp. Your hair can be wet, towel dried or dry.
The HairMax LaserComb should be used prior to applying any other
topical treatments, gels, spray or concealing products.
HairMax LaserComb Professional 12
Advanced 6
QUICK START GUIDE
Laser Light - Avoid Direct Eye Exposure
A
B
