METHODS OF CHARGING THE HAIRMAX
The HairMax is equipped with a built-in Lithium Ion Battery and once charged
can be used without the attached power cord. The battery can be recharged
thousands of times to provide years of continuous use.
Charging can be accomplished in the two following ways:
Method 1:
Charging the HairMax using the CHARGING
CRADLE (stand) and power cord. See graphic (A).
Method 2:
Charging the HairMax by placing the
POWER CORD directly into the handle end of the
HairMax. See graphic (B).
CHARGING INSTRUCTIONS
1) Read and understand all instructions prior to use.
2) Make sure to fully charge your HairMax prior to using it for the first time.
3) Remove the HairMax, CHARGING CRADLE and POWER CORD from the case.
4) Remove the SAFETY LABEL to gain access to the POWER and LASER BUTTONS.
5) Connect one end of the POWER CORD to the CHARGING CRADLE and insert
the other end of POWER CORD to an indoor electrical wall outlet.
6) Place the HairMax in the CHARGING CRADLE. The charging process will
begin. The CHARGING CRADLE Indicator will light up RED during charging.
Within approximately 2-3 hours the CHARGING CRADLE Indicator will turn
GREEN which means that the device is fully charged and ready for use.
7) As an option, the POWER CORD can be inserted directly to the end of
HairMax and be charged in that manner. Plug the POWER CORD into the end
of the HairMax as shown above (B). Plug the other end into an indoor
electrical wall outlet. The BATTERY INDICATOR light on the HairMax will light
up yellow during charging. When fully charged, the BATTERY INDICATOR light
will change to GREEN. Your HairMax is now ready for use. It can be used with
or without the POWER CORD.
8) When the Lithium Ion Battery requires charging, the BATTERY SYMBOL
(within the INFORMATION DISPLAY) will begin to flash and the BATTERY
INDICATOR light on the HairMax will begin flashing RED. Proceed with the
steps 5 through 7 above to recharge your HairMax.
Please Note:
If your device needs to be recharged during your treatment, simply
insert the POWER CORD directly to the end of the device and other end into electrical
wall outlet and continue with your treatment (see step 5 above). When finished, allow
the device to fully charge.
7
(A)
(B)
ManualDEC09:11638_lex_TXT 12/9/09 9:54 AM Page 7
