HairMax LaserBand 82
Quick guide
The HairMax LaserBand 82 is a very effective device when used correctly. It is manufactured using
precision components and should last 10-15 years under normal usage. Please take time to read the
entire User Manual before operating the LaserBand.
Use the LaserBand 82 for less than 90 seconds, 3 times a week, ideally every other day (for
example Monday, Wednesday, Friday).
FOR MAXIMUM BENEFIT:
scalp should be freshly washed (hair can be wet, dry or damp)
use the LaserBand prior to applying styling products (these can build up and impede the
laser light)
regularly clean the laser window with a damp cloth. Do not use harsh detergents or cleaning
products on any part of the LaserBand.
Charge your LaserBand for 4-5 hours before initial use.
Charge the LaserBand by plugging the
power cord directly into the charging socket on the bottom right side of the LaserBand (Figure A).
Plug the other end into an electrical socket. The indicator light on the power button will flash blue
during the charging process. A steady blue light indicates your LaserBand is fully charged (Figure
B).
NOTE - POSITION THE LASERBAND WITH THE POWER BUTTON ON THE RIGHT SIDE
OF YOUR HEAD
Before beginning treatment
, be sure to test the LaserBand for sensitivity (see page 5 of your User
Manual). Next, press the power button once to activate the 30-second treatment method or twice for
the 4-second treatment method (Figure C). See Page 11 of the User Manual fora more in-depth
explanation of the two treatment methods. Choose either the 30-second or the 4-second treatment
method. (Do not treat your hair with both methods).
30-second treatment method
Press the power button to select the 30-second treatment method. Place the LaserBand at your
hairline and leave it in place until it vibrates (Figure D). Next, slide the LaserBand to the middle
portion of your scalp using light pressure so the teeth can separate your hair (Figure E). When your
LaserBand vibrates again, slide it to the last spot on your scalp (Figure F). You have completed
today’s treatment
4-second treatment method
Press the power button twice to select the 4-second treatment method. Place the LaserBand at your
hairline and leave it in place until it vibrates (Figure D). Next, slide the LaserBand to the middle
portion of your scalp using light pressure so the teeth can separate your hair (Figure E). When your
