background image

3. 

www.haihao.com.tw 

HaiHao

USB Slot

1. Accessories:

1.Bag

4.USB Cable

3.Sling

5.Adapter for AC

6. Velcro

7. Magical clip

2. Plastic clip

(A) Front Lens

(B) Top Lens

2. Len directions : two types

 

*CAUTIONS*

A. 

SD card repair

 program : www.haihao.com.tw/upc/sdcardformat2.html                                         

B.

「Lens Fogging」

is a common situation cause by difference of temperature. If it is happened and you should put the product to the dehumidifier or

     air condition. It will disappear . To aviod the fog please put the product to the Ventilating and drying area when the rainy day. 

C. 

Do not

  lack of the battery otherwise the time will 

be reset

.

*POWER CHECK*

A. When the battery is lowly 

(below 1.5 hr)

,lower power lights 

(RED)

 will twinkling per/min. If the power goes out, UPC-700W will close.

B. It will 

display on the screen 

when connecting Wi-Fi on the Phone.

UPC-700 Wi-Fi

(Body Cam)

 

User Manual Rev2.0

Standard Mode(without Wi-Fi)

(2)  CONNECTING WITH THE USB 

(1)  RECORDING AND TURN OFF

  A. Film mode : Press the "Top button" once, blue lights → about 4 to 5 secs it will be start 

(blue-light twinkling)

  B. Turn off : Video status

 (blue-light twinkling)

 or standby status 

(blue-light)

. Pressing the  "Top button"about 2 secs and  the blue-light  will twinkle quickly  2 times 

       →release the button and it will  shut down (

blue-light goes out

).

  C. Standby mode :  When blue-light shining, means the Standby mode. 

Body Cam will turn off

 automatically when there is no action after 60 secs.

  D. Camera mode :  When it is Standby mode , press the "

Bottom button

" and it will take a photo(

blue-light

 flashes once), then back to the Standby mode.

       Pressing the "Top button " back to 

Film mode

.

  E. Screen Shot(Camera) : Under the Film mode press the "

Bottom button

"   ,after 

screen shot it will back to filming

.

  F. IR/LED light On : Press the "

Bottom button

" for 2 secs when Body Cam is 

recording

(before connecting Wi-Fi) or Standy mode. → The IR/LED light will turn on ; 

      then Press the "

Bottom button

"

 

for 2secs to turn off.

A. When connect to room electric (110V / 220V), car charger (12V)and power bank (5V) this status is

 charge while recording

(red-light and blue-light twinkling)

.    

     If you want to shut down power,remove the cable away. 

B. When connect to the computer or smartphone, it is 

for reading the information standby  mode

(blue light

 shining

)If you want to remove from the computer or

    smartphone please follow the procedure of unload memory required.

C. 

Charge mode

: When Body Cam connect to the USB cable,which is connect to the room electric or computer. Using the "turn off"  to stop video recording or data 

     reading (blue light off,

Charging red light on

). The Charging red light

 will turn off 

automatically when Body Cam is fully charged. 

(3)  DATA READING

A.Computer reads the data: Using USB cable to connect computer (

red and blue light, or just  blue light

) → The screen will appear removable disk information, 

    → Open the folder to view  files,  → Unmount hardware  safely after reading.

*Note : (1). When read data from smartphone, hearing sound only but no video, need to press  the " hardware decoding" and press the"software decoding" again.

              (2). Please using SD card formatter program (

Reference the *CATIONS A

 ), and  we suggest that format it regularly.

Signal light(

Blue light

)

Lower power light

(RED)

IR/LED light 

IR/LED light 

Wi-Fi Button

Top button

Bottom button

Wi-Fi 

blue

 light 

Charging 

red 

light

Отзывы: