Haier T13, Руководство по обслуживанию

Страница: 65 / 70

Service manual T13
65
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE
Wash
Dry End
ERROR
DESCRIPTION CONTROL
Inadequate water
supply
• Make sure the water input tap is totally open and that
there is no water cut.
•
Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
• Restart your machine, contact the service if the error
resumes.
Error of continuous
water input
•
Close the tap.
•
Contact the service.
The waste water in the
machine cannot be
discharged.
•
Water discharge hose is clogged.
•
The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
•
If the error continues, contact the service.
Intended water
temperature could not
be reached faulty
heater and heater
sensor
Contact the service.
Alarm is active against
water overflow
•
Power off your machine and close the tap.
•
Contact the service.
Faulty electronic card Contact the service.