Haier MRV 5-RC AB052MAERA Скачать руководство пользователя страница 111

Страница: 111 / 243

108

• If the valve box is transferred to a new user, this manual shall be transferred to the user, together with the

conditioner.

• Before installation, be sure to read Safety Considerations in this manual for proper installation.

•

The safety considerations stated below is divided into “ Warning” and “ Attention”. The matters on severe

accidents caused from wrong installation, which is likely to lead to death or serious injury, are listed in “

Warning”. However, the matters listed in “ Attention” are also likely cause the severe accidents. In general, both

of them are the important items related to the security, which should be strictly abided by.

•

Afte

r the installation, perform test run to make sure everything is in normal conditions, and then operate and

maintain the valve box in accordance with the user manual. The user manual should be delivered to the user for

proper keeping.

• Please ask the special maintenance station for installation and repair. Water leakage, electric shocks or fire

accidents might be caused from improper installation if you conduct the installation by your own.

• The installation should be conducted properly according to this manual. Water leakage, electric shocks or fire

accidents might be caused from improper installation.

•

Please make sure to install the valve box on the place where can bear the weight of the valve box. The valve box

can’t be installed on the grids such as the non-special metal burglar-proof net. The place with insufficient support

strength might cause the dropdown of the machine, which may lead to personal injuries.

• The installation should be ensured against typhoons and earthquakes, etc. The installation unconformable to the

requirements will lead to accidents due to the turnover of the machine.

• Specific cables should be used for reliable connections of the wirings. Please fix the terminal connections reliably

to avoid the outside force applied on the cables from being impressed on the cables. Improper connections and

fixings might lead to such accidents as heating or fire accidents.

•

Correct shapes of wirings should be kept while the embossed shape is not allowed. The wirings should be reliably

connected to avoid the cover and the plate of the electrical cabinet clipping the wiring. Improper installation might

cause such accidents as heating or fire accidents.

• While placing or reinstalling the valve box, except the specific refrigerant (R410A), don’t let the air go into the

refrigeration cycle system. The air in the refrigeration cycle system might lead to the cracking or personal injuries

due to abnormal high pressure of the refrigeration cycle system.

• During installation, please use the accompanied spare parts or specific parts. If not, water leakage, electric

shocks, fire accidents or refrigerant leakage might be caused.

• During installation, if refrigerant leakage occurs, ventilation measures should be taken, for the refrigerant gas

might generate harmful gases upon contacting the flame.

• After installation, check if any refrigerant leakage exists. If the refrigerant gas leaks in the room, such things as air

blowing heaters and stoves, etc. may generate harmful gases.

• Don’t install the valve box at the places where the flammable gases may leak. In case the gas leakage occurs

around the machine, such accidents as fire disasters may be caused.

• The refrigerant gas pipe, HP gas pipe and liquid pipe should be heat insulated to preserve heat. For inappropriate

heat insulation, the water caused from the condensation will drop to get the article at home wet.

• The electrical construction shall be implemented by the correspondingly qualified personnel in accordance with

electrical construction standards, local electrical laws as well as specifications. Moreover, dedicated circuit must

be used, rather than the wire pin. Insufficient capacity of the wire circuit and unprepared construction (if any) may

cause electric shock, fires, etc.

• During the process of grounding, the ground wire cannot be connected to the gas pipe, water pipe, lightning rod

and ground wire of the telephone. Incomplete grounding may cause electric shock, fires, etc.

• Install residual-current circuit breaker, or electric shock, fires, etc. will occur.
• When contacting electrical components, ensure they are powered off. Contacting the live part may result in the

danger of electric shock.

• If there is leakage of the refrigerant gas flow during operation, refrigerant gas is required. If the refrigerant gas

contacts any fire, poisonous gases will be produced.

Warning

Содержание MRV 5-RC AB052MAERA




















































































































































































































































Результаты поиска

Содержание MRV 5-RC AB052MAERA

Отзывы:

Похожие инструкции для MRV 5-RC AB052MAERA

Бренды по названию

Популярные бренды

Haier MRV 5-RC AB052MAERA, Руководство по обслуживанию

Результаты поиска

Содержание MRV 5-RC AB052MAERA

Отзывы:

Похожие инструкции для MRV 5-RC AB052MAERA

Бренды по названию

Популярные бренды