b Steps of using the operation buttons and description
of the steps
POWER
ON/OFF
1.Push "POWER ON/OFF"button to switch on the power
2.Push " PROGRAM " button to select suitable
automatic program
Page 10
After the power is switched on, " SOAK " is
automatically set. To select other fully-auto program,
please push the " PROGRAM " button till the corresponding
indicator is on. Refer to the " Program " button on Page 10.
Even there's no water in the tub, the
spinning will start after a certain period.
Wash the laundries that are prone to lose
colors separately from other laundries.
When washing start or opening cover intermitting, the washing machine
will begin to work after a period time, this is normal phenomenon.
Only select RINSE program,If there's water inside the tub, the machine
will spin before rinsing ,If there's no water the machine will rinse directly
Wash and spin after putting the damageable
clothes into tuck net, to avoid scathe.
Attention
STANDARD Fuzzy
QUICK
SOAK
WASH
RINSE
SPIN
POWER
ON/OFF
TUB DRY
SOFT
RESERVE
LIGHT
LIGHT
FLASH
FLASH
START
PAUSE
WATER LEVEL
PROGRAM
PROGRAM
If STANDARD program is set, the machine will execute fuzzy detection. The computer
will set the water level and wash time as per the cloth and quantity of the laundries. The
whole procedure is under automatic control.
"
"
The pulsator will not rotate unless the water is filled to selected water level.
REMAIN(MINUTES)
RESERVE(HOURS)
