27
CArE ANd CLEANiNg
removing and refitting the oven door
To remove
1
Open the door to the first stop position.
2
Holding the handle firmly with both hands, lift the door up and away from the cooker to
disengage the hinges.
ImpORTANT!
do not place your hands near the hinges while removing or replacing the door. The
hinges are spring-loaded and could cause an injury when they snap back.
To refit
3
Holding the handle firmly with both hands, slide the hinge arms into the slots.
4
Lift the door and push it from the bottom to engage the hinges.
5
Close the door firmly and check if it is properly in place.
drop-down grill element
ImpORTANT!
Before lowering the grill element, make sure that it has cooled down.
●
●
The grill element is held in place by a wire clip at its front. To release and lower the
element, pull the wire clip down and swing it slightly towards you.
●
●
When you have finished cleaning the oven ceiling: raise the grill element all the way up,
then swing the wire clip towards the back of the oven to hook the element into place.
Make sure that the element is securely fixed.
●
●
The grill element itself will self-clean during use.
Wire clip
Содержание HOR61
Страница 1: ...Freestanding cooker HOR61 models NZ AU INSTALLATION INSTRUCTIONS USER GUIDE ...
Страница 2: ......