Haier HL40XP1, Руководство по обслуживанию

Страница: 5 / 63

Service Manual
Model No.: HL40XP1
4
components commonly are called Electrostatically Sensitive (ES) Devices. The following
WHFKQLTXHVVKRXOGEHXVHGWRKHOSUHGXFHWKHLQFLGHQFHRIFRPSRQHQWGDPDJHFDXVHGE\
electros static discharge (ESD).
Electrostatically Sensitive (ES) Devices
Some semiconductor (solid-state) devices can be damaged easily by static electricity. Such
components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical
ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"
FRPSRQHQWV7KHIROORZLQJWHFKQLTXHVVKRXOGEHXVHGWRKHOSUHGXFHWKHQFLGHQFHRIFRPSRQHQW
damage caused by static by static electricity.
,PPHGLDWHO\EHIRUHKDQGOLQJDQ\VHPLFRQGXFWRUFRPSRQHQWRUVHPLFRQGXFWRUHTXLSSHG
assembly, drain off any electrostatic charge on your body by touching a known earth ground.
Alternatively, obtain and wear a commercially available discharging wrist strap device, which
should be removed to prevent potential shock reasons prior to applying power to the unit under
test.
$IWHUUHPRYLQJDQHOHFWULFDODVVHPEO\HTXLSSHGZLWK(6GHYLFHVSODFHWKHDVVHPEO\RQD
conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of
the assembly.
1-3-4. About lead free solder (PbF)
This product is manufactured using lead-free solder as a part of a movement within the
consumer products industry at large to be environmentally responsible. Lead-free solder must be
used in the servicing and repairing of this product.
8VHWKHJHQHZLQJSDUWVVSHFL¿HGSDUWV
6SHFLDOSDUWVZKLFKKDYHSXUSRVHVRI¿UHUHWDUGDQWUHVLVWRUVKLJKTXDOLW\VRXQGFDSDFLWRUV
low noise (resistors), etc. are used.
:KHQUHSODFLQJDQ\RIFRPSRQHQWVEHVXUHWRXVHRQO\PDQXIDFWXUHVVSHFL¿HGSDUWVVKRZQLQ
the parts list.
Safety Component
Ɣ&RPSRQHQWVLGHQWL¿HGE\PDUNKDYHVSHFLDOFKDUDFWHULVWLFVLPSRUWDQWIRUVDIHW\
1-3-6 Safety check after repairment
&RQ¿UPWKDWWKHVFUHZVSDUWVDQGZLULQJZKLFKZHUHUHPRYHGLQRUGHUWRVHUYLFHDUHSXWLQWKH
original positions, or whether there are the positions which are deteriorated around the serviced
places serviced or not. Check the insulation between the antenna terminal or external metal and
the AC cord plug blades. And be sure the safety of that.
General Servicing Precautions