Haier HA1000, Руководство пользователя

Страница: 15 / 16

13
Trouble shooting
The following circumstances do not constitute problems. Do not contact the main-
tenance service until the problem has been confirmed.
Problem Possible Cause
• Poor connection to power supply
• Power failure
• Door is not properly closed
• Machine has not been switched on
Washing machine does not fill
with water
• Water is not turned on
• Water pressure is less than 0.05MPa
• The inlet hose is kinked
• Water supply failure
• The program knob is not properly set
• The door is not properly closed
The water supply and
drainage do not stop
•
Check that the height of the water hose is below
80cm
Drainage failure
• Drainage hose is blocked
• Drainage hose end is below 100cm above the
floor level
Excessive foam in the drum
• The detergent is not a low foam type
Excessive detergent has been used
Operation stops before completion
of the wash cycle
•
Water or electricity failure
Strong vibration during spin
• Some packing fixing bolts removed
• Washing machine on a uneven surface
The washing machine fails to operate