Haier FlexFit Pro AL24LP2VHA, Руководство по обслуживанию

Страница: 99 / 121

95
FlexFit Pro
6.1.10 Timing operation:
1) When using wired controller, unit will be controlled ON/OFF by wired controller
2) When using remote controller, unit will be ON/OFF according to set time by remote controller and current time.
6.1.11 Sleeping function:
1) When using wired controller, unit will be controlled ON/OFF by wired controller
2) When using remote controller, press sleep key to set sleep function including sleeping in heating and sleeping in
cooling. After setting sleeping function and then shift mode, sleeping will recount.
6.1.12 Swing control:
1) When choosing 24k Cassette:.
When powering on and initializing, it will Fully open for positioning, and then enter basic opening, fan motor
operating after blade moving to right position.
2) When choosing 36k/48k cassette, swinging will be controlled by invisible LED.
It will swing according to default position when first powering on, and will swing according to swing position
before turning off.
6.1.13 External static pressure setting method
There are 2 ways to achieve the external static pressure setting:
A. by Infrared remote controller
B. by wired controller.
MOEDL
Static
Pressure
Level ( N)
Externalstatic
Pressure
Select by Infrared
Remote Controller
Select
By Wired
Controller
AM36LP2VHA
AM48LP2VHA
1 25Pa
YR-HBS01 +RE-
02→FAN mode ,fan
speed high→press
HEALTH button 4+N
times(1≤N≤10,integer)
within 12 seconds
Select static
pressure
Level N by the
display interface
2 37Pa
3 50Pa
4 70Pa
5 90Pa
6 100Pa
7 110Pa
8 120Pa
9 130Pa
10 150Pa
A.Static selection via remote:
1. Prepare: Infrared remote controller YR-HBS01 , infrared remote receiver RE-02(plug RE-02 connector to indoor
PCB CN29)
2. Method:
Step 1: set the remote controller in the high speed FAN mode.
Step 2: then aim the remote controller at the infrared remote receiver RE-02, press HEALTH button 4+N
times(1≤N≤10,integer) within 12 seconds ,The receiver will beep N+1 times indicating the static pressure level has
been set.
Note: For Infrared remote controller YR-HBS01, press ON/OFF button to set the controller at the OFF position.
Open the cover of the controller and press the FRESH button to enter the FAN mode interface.